[數] 三次多項式；立方次多項式

Perfect Cubic Polynomial完全立方多項式

cubic trigonometric polynomial spline curve三次三角多項式樣條曲線

cubic trigonometric polynomial curve三次三角多項式曲線

cubic polynomial interpolation method三次多項式插值法

cubic polynomial function三次多項式函數

cubic interpolation polynomial三次插值多項式

cubic rational polynomial三次有理多項式

cubic-polynomial fitting三次多項式擬合法

by comparing the results for the linear function and cubic polynomial function and the convergences of eigenvalue.

比較了線性插值函數和三次插值函數的計算結果和本征值的收斂性。

studied in this paper are center conditions and bifurcation of limit cycles from the equator for a class of cubic polynomial system.

本文研究了一類三次系統無窮遠點的中心條件與赤道極限環分枝問題。

singular point quantities and center conditions at the infinity for a class of cubic polynomial system;

研究一類五次多項式系統無窮遠點的中心條件與赤道極限環分支。

taking cubic polynomial for instance, it built state transition matrix and other parameters;

以三次多項式為例，構建了狀態轉移矩陣和其它參數；

the continuity and differentiability are achieved by using cubic polynomial interpolation based on hard thresholding.

用三次多項式在硬閾值的基礎上插值，使新的閾值函數保持了連續性和可導性。

this paper studied the center conditions at the equator for a class of cubic polynomial system with no singular point at the infinity.

研究一類五次多項式系統無窮遠點的中心條件與赤道極限環分支。

in this dissertation, a line extraction method based on cubic polynomial interpolation and minimum mean square error fitting are proposed, which can effectively extract lines out.

本文采用三次多項式插值和曲線擬合相結合的方法可簡單有效地提取出在線掌紋的線特征。

this plotter can be used directly to plot the curves of linear and quadratic equations, cubic polynomial equations and cubic spline functions.

能直接繪制一次、二次曲線、三次多項式和三次樣條曲線。

the bifurcation of limit cycles at infinity for a class of cubic polynomial systems was studied in the paper.

研究了一類三次系統無窮遠點的極限環分支問題。

the formulation of cubic polynomial interpolation and the remainder of cubic polynomial interpolation were deduced and the engine fuel consumption characteristics map was drawn by this method.

推導了三次多項式插值公式和三次多項式插值余項，繪制了發動機萬有特性曲線。

because only two points a straight decisions, and in between the two curves can be used an infinite number of cubic polynomial approximation.

因為，兩點只能決定一條直線，而在兩點間的曲線可用無限多的三次多項式近似。因此，為使結果具有唯一性。

the complexity of dsafo is bounded between quadratic and cubic polynomial time.

dsafo算法具有不錯的時間復雜度：介於平方和三次方之間。

refrigerant's thermal physical characteristics are calculated according to implicit cubic polynomial curve-fitting model.

制冷工質的熱物理性質使用隱式三次多項式擬合模型計算。