90°三节渐缩弯头钣金件的放样展开方法研究 |
您所在的位置:网站首页 › creo钣金件展开图工程图 › 90°三节渐缩弯头钣金件的放样展开方法研究 |
90°三节渐缩弯头钣金件的放样展开方法研究
邹泽昌 ; 杨开怀 ; 周长海 ; 陈忠士
【摘
要】 The lofting design and expanded blanking of sheet metal parts is an important part of the product development and production process.Through the manual lofting drawing expansion graph,the traditional cutting material is heavy workload and low efficiency.Use 3D software SolidWorks sheet metal module on 90 degrees three quarter elbow of reducing elbow aided lofting design.The material can be easily expanded,and the production efficiency is improved.The practice proves that 3D software aided lofting expansion method compared with the traditional sheet metal lofting method has the ad-vantage of precise design,fast operation and easy modification.% 钣金件的放样设计和展开下料 是产品开发和生产过程中重要的一环 . 针对以往下料前都是通过手工放样来绘制展 开图 , 工作量大 , 效率低 , 研究应用三维软件 SolidWorks 钣金模块对 90°三节渐缩弯 头进行辅助放样设计 , 不仅能很方便地展开下料 , 而且提高了生产效率 . 实践证明 , 三维 软件辅助放样展开法与传统钣金展开放样方法相比 , 具有设计精确、操作快捷和便 于修改的优点 .
【期刊名称】 《新技术新工艺》
【年 ( 卷 ), 期】 2016(000)010
【总页数】 3 页 (P7-9)
【关键词】 钣金 ; 放样设计 ;SolidWorks; 展开下料 ; 三节渐缩弯头
|
今日新闻 |
推荐新闻 |
CopyRight 2018-2019 办公设备维修网 版权所有 豫ICP备15022753号-3 |