Hardware support · rbei |
您所在的位置:网站首页 › busmaster翻译 › Hardware support · rbei |
If you get the message "Driver selection failed" in the BUSMASTER Trace Window, you might not have the correct drivers installed. This page provides information on the supported hardware and driver download information: 8 devices (no support planned yet) ASAM HiL API (no support planned yet, see https://github.com/rbei-etas/busmaster/issues/103) dSpace (no support planned yet, see https://github.com/rbei-etas/busmaster/issues/119) Eberspächer (no support planned yet) ECOM (no support planned yet, see https://github.com/rbei-etas/busmaster/issues/651) Elektrobit (no support planned yet, see https://github.com/rbei-etas/busmaster/issues/98) esd (no support planned yet) ETAS (supported in v1.0.0+) gridconnect (no support planned yet) grifo (no support planned yet) I+ME ACTIA (no support planned yet) ifak system (no support planned yet, see https://github.com/rbei-etas/busmaster/issues/512) Intrepid Control Systems (supported in v1.1.0+) IXXAT (supported in v1.6.5+) i-View (supported in v1.9.0+) Kvaser (supported in v1.3.0+) MHS-Elektronik (supported in v1.6.0+) National Instruments (no support planned yet, see https://github.com/rbei-etas/busmaster/issues/97) Netronics (no support planned yet) NSI (support in v1.9.0+) PEAK-Systems (supported in v1.0.0+) Softing (no support planned yet, see https://github.com/rbei-etas/busmaster/issues/73) sontheim (no support planned yet) VCI API (no support planned yet, see https://github.com/rbei-etas/busmaster/issues/35) Vector Informatik (supported in v1.2.0+) VisionSystems (supported in v1.7.0+) General noteBUSMASTER does not install any driver global, e.g. in Windows System32. Therefore there should be no influence on other applications on the system. However there is one exception. The LoadLibrary of Windows is clever in the way that it detects when an equally-named library is already loaded, even if it's used by another application. So if you start BUSMASTER first, the same library is used for other applications, e.g. INCA, as well and vice-versa. This might lead to problems if use access the same hardware with two applications and different driver versions. 8 devices Supported devices USB2CAN: not supported yet Driver InformationThe USB2CAN driver is available at http://www.8devices.com/product/2/usb2can/downloads. Development kitThe CANAL API description is available at http://www.8devices.com/product/2/usb2can/downloads. ASAM HiL APIASAM HiL API currently defines the standard interface regarding CAN use cases for Hardware-in-the-Loop testing. Supported devicest.b.d. Driver Informationt.b.d. Development kitt.b.d. dSpace Supported devicest.b.d. Driver Informationt.b.d. Development kitt.b.d. Eberspächer Supported devicest.b.d. Driver Informationt.b.d. Development kitt.b.d. ECOM Supported devices CANCapture: not supported yet Driver InformationThe ECOM device driver is available at http://www.cancapture.com/ecom.html. Development kitSupporting documents are available at http://www.cancapture.com/ecom.html. ElektrobitNot supported yet. See https://github.com/rbei-etas/busmaster/issues/98 Supported devices http://www.eb-tresos-blog.com/autosar-4-0/solutions/tresos/eb-2100/ http://www.eb-tresos-blog.com/autosar-4-0/solutions/tresos/eb-5100/ http://www.eb-tresos-blog.com/autosar-4-0/solutions/tresos/eb-61x0/ Driver informationt.b.d. Development kitt.b.d. esd - electronic system design Supported devicesThe support should cover at least the following interfaces: CAN-USB/2 CAN-USB/Micro CAN-USB-Mini Driver InformationThe drivers are available as part of the CAN SDK. Development kitThe CAN SDK is available at http://www.esd.eu/esd2004/german/products/Software/can_sdk_summary_e.htm ETASThe support is available in version 1.0.0+. Please select "ETAS BOA" respective "ETAS ES581" as hardware interface. Supported devicesETAS BOA supports hardware from other manufacturers as well. The following outlines only the ETAS devices. These devices work: ES511 ES580 ES581 (see advices below) ES582 (see advices below) ES583 ES584 (see advices below) ES592 ES593-D ES595 ES910 ES921 (Hint: This is an extension board for the ES910)BUSMASTER has a known problem that prevents ES592, ES593-D, ES595 to be detected under Windows 7 64-Bit. These devices do not work: ES590/ES591/ES690 ES6515, ES6516 and ETAS ES6520. See below for VCI devices.If your ETAS interface is connected via Ethernet and it is not found in the BUSMASTER Hardware Selection, try the following: Network protection (e.g. firewall) should be down or configured to allow communication from/to the device. Use a static IP address in the device's subnet. Make sure the Windows 7 Network Discovery does not change the configuration! Don't run the Hardware Service Pack before running BUSMASTER as it could change the device's IP address. Driver informationETAS devices are supported using the ETAS Hardware Service Pack. It contains the hardware abstraction layer "ETAS BOA Runtime Framework" and the drivers "ETAS Drivers - ECU and Bus Interfaces" (ED-EBI). It also contains the IP-Manager component which is necessary to automatically configure the Ethernet-connected interfaces, e.g. ES59x. BUSMASTER supports all current versions of BOA: BOA v1.4 since BUSMASTER v1.0.1 BOA v1.5 since BUSMASTER v2.1.0 BOA v2 since BUSMASTER v2.2.0ETAS BOA Runtime Framework could now be downloaded separately at https://www.etas.com/en/downloadcenter/18102.php Driver information - ES581.3 specificFor ES581.3 devices there is a direct driver available if you select "ETAS ES581.3" in the "Hardware Interface" menu. This entry first tries to load ETASneo40.dll and then icsneo40.dll as fall back. BUSMASTER comes with both libraries installed in the application folder. If you experience problems with the distributed drivers try to delete one or the other library. In this case the global installed libraries are used instead. Driver and firmware versions needs to be compatible. The driver usually comes with a firmware and if configured to do so (default), will automatically flash the firmware to a compatible version. If the firmware is not updated automatically, try to flash manually via the ETAS Hardware Service Pack (HSP). ES581.3 devices with a serial number >=40000 need a firmware version 0.84 at least. Information - ES582 specificFor ES582 (USB to CAN/CAN-FD) device, please contact ETAS sales for further information on technical details, pricing, availability Note: The ES582 functionalities related to CAN-FD are not supported in Open Source. CAN-FD add-on is required to perform CAN-FD related activities. Information - ES584 specificFor ES584 (USB to CAN/CAN-FD/LIN) device, please contact ETAS sales for further information on technical details, pricing, availability Note: The ES584 functionalities related to CAN-FD are not supported in Open Source. CAN-FD add-on is required to perform CAN-FD related activities. Development kitThere is an SDK available to implement new hardware underneath the BOA framework called "ETAS BOA Framework Development Add-on", and an SDK to build applications based on BOA called "ETAS ECU and Bus Interfaces Integration Package" (EBI-IP). Both SDKs are available upon request. The necessary header files of the ETAS BOA Framework Development Add-on are part of the BUSMASTER source codes. gridconnectgridconnect offers some own interfaces and also sell CAN interfaces from PEAK. Supported devices CAN USB Adapter: supported via PEAK PCAN RS232 CAN Adapter: not supported yet USB CAN Interface: not supported yetA complete list is available at http://gridconnect.com/pcan/can-adapters.html. Driver InformationDue to the documented serial protocol, the application has to directly support these interfaces. The driver supplied via the product homepage just supports the USB-to-serial FTDI chip. Development kitThe protocol used for RS232 and USB connectivity is documented at: http://gridconnect.com/media/documentation/grid_connect/CAN_USB232_UM.pdf grifogrifo offers CANUSB, which seem to be identical to the CANUSB interface from LAWICEL. Supported devices CANUSB: not supported yet Driver InformationThe CANUSB driver is available in the download section of another page: http://www.canusb.com/ Development kitThe CANUSB SDK (manual and examples) is available in the download section of another page: http://www.canusb.com/ I+ME ACTIACurrently there is only a feature request in issue #364. Supported devices XS LITE Driver informationThe driver is available via the download page: http://www.ime-actia.de/download.htm http://www.ime-actia.de/web_can/software/download_sw.htm Development kitThe development kit is only available upon request: http://www.ime-actia.de/web_can/software/levelx_driver.htm ifak system Supported devicesIt is intended to support the following devices: isCAN USB Driver InformationThere is a isCAN Multidriver available for download on the product page. Development kitt.b.d. Intrepid Control SystemsThe support is available in version 1.1.0+. Please select "IntrepidCS neoVI" as hardware interface. Supported devices ValueCAN3 Driver informationIntrepid devices are supported using the neoVI library (icsneo40.dll). At least version 3.5.1 is required. There are two installers from Intrepid that install the icsneo40.dll in the Windows %system32% folder: Vehicle Spy Trial installs Version 3.5.1.67 or higher and device firmware version 0.71 or higher. This installation is recommended. RP1210/J2534 API Installer installs Version 3.5.1.61 or higher and device firmware version 0.69 or higher. Development kitIntrepid provides an API documentation that contains links to download the driver. IXXATThe support is available in version 1.6.5+. Please select "IXXAT VCI" as hardware interface. Supported devices USB-to-CAN compact USB-to-CAN II Driver information http://www.ixxat.com/download_vci_v3_en.html http://www.ixxat.com/download_vci_en.html Development kit http://www.ixxat.com/download_vci_v3_en.html http://www.ixxat.com/download_vci_en.html i-ViewThe support is available in version 1.9.0+. Please select "i-VIEW" as hardware interface. Supported devicest.b.d. Driver informationt.b.d. Development kitt.b.d. KvaserThe support is available in version 1.3.0+. Please select "Kvaser CAN" as hardware interface. Supported devices Leaf Memorator other devices should work Driver informationThe Kvaser library is installed by the BUSMASTER installer. In addition you need the "Kvaser Drivers for Windows 2000/XP/Vista/Windows 7". The download is available at http://www.kvaser.com/downloads.html. Select "Driver" as "Download Type". The current version of the drivers is 4.6 (date 2011-11-29). Development kitThe Kvaser CANlib SDK provides an Application Programming Interface for interfacing to all Kvaser hardware platforms. The download is available at http://www.kvaser.com/downloads.html. Select "Development Kits and Tools" as "Download Type". The current version of the SDK is 4.6 (date 2011-11-29). MHS-ElektronikThe support is available in version 1.6.0+. Please select "MHS Tiny-CAN" as hardware interface. Supported devicesAll bus interfaces listed at http://www.mhs-elektronik.de/cgi-bin/mhs.pl?id1=2&id2=0: Tiny-CAN I Tiny-CAN II-XL Tiny-CAN IV-XL Tiny-CAN M1 Tiny-CAN M232 Driver informationTiny-CAN devices are supported using the Tiny-CAN API. Development kitt.b.d. National InstrumentsNot supported yet. See https://github.com/rbei-etas/busmaster/issues/97 Supported devices All bus interfaces listed at http://www.ni.com/comm/ and http://www.ni.com/can/. Driver informationt.b.d. Development kitt.b.d. netronicsNetronics Ltd. offers the CANdo interface family. Supported devices CANdo: not supported yet Driver InformationThe driver as well as the CANdo programmer is available as part of the CANdo Installer package available at: http://www.cananalyser.co.uk/download.html Development kitThere is a CANdo SDK available at: http://www.cananalyser.co.uk/download.html NSIThe support is available in version 1.9.0+. Please select "NSI CAN-API" as hardware interface. Supported devicesAn overview of the devices is shown here: http://www.altran.fr/a-propos-daltran/les-autres-offres-altran/nsi/outils-et-produits.htmlThe following devices are supported: CAN PCMCIA family CAN PCI family MUXy MUXy BOX MUXy light MUXy 2010 MUXy BOX 2 Driver informationThe driver is available via the download page: http://www.altran.fr/a-propos-daltran/les-autres-offres-altran/nsi/outils-et-produits/telechargements.html Development kitt.b.d. PEAK-SystemsThe support is available in version 1.0.0+. Please select "PEAK USB" as hardware interface. Supported devices PCAN-USB Driver informationPEAK devices are supported using the PCAN API and the Peak OEM drivers. The PCAN API was obtained by RBEI and is delivered by BUSMASTER. It is installed as canapi2.dll in the BUSMASTER installation folder. The Peak OEM drivers are part of the following download: http://www.peak-system.com/fileadmin/media/files/usb.zip. Execute the contained PeakOemDrv.exe to install the drivers. The default location is C:\Program Files\PCAN\Drivers. Development kitThe Development Kit was obtained by RBEI and is not available for free download. SoftingNot supported yet. See https://github.com/rbei-etas/busmaster/issues/73 Supported devices All bus interfaces listed at http://www.softing.com/home/en/automotive-electronics/products/hardware/bus-interfaces/index.php?navanchor=3010007. Driver informationThe driver is available on their download page. Development kitSofting devices can be used with their CAN-API or as VCIs (see below). sontheimNot supported yet. Supported devicesAn overview of CAN interfaces is available at: http://www.sontheim-industrie-elektronik.de/en/products/interfaces.html Driver informationt.b.d. Development kitt.b.d. VCI (Vehicle Communication Interfaces) APINot supported yet. See https://github.com/rbei-etas/busmaster/issues/35 Supported devices ETAS ES6515 ETAS ES6516 ETAS ES6520 Driver informationt.b.d. Development kitt.b.d. Vector InformatikThe support is available in version 1.2.0+. Please select "Vector XL" as hardware interface. Supported devices CANcardXL CANcaseXL VN1610/VN1611 VN1630/VN1640 other devices should work Driver informationVector devices will be supported using the Vector XL Driver Library. The current version is 7.5. It gets installed at "C:\XL Driver Library". In addition the Vector Driver Setup should be run. The current version for Windows XP/Vista/7, 32 bit is 7.7.52. Others versions are available in the Vector Download-Center. The drivers get installed at "C:\Windows\System32\drivers". Development kitThe Vector XL Driver Library includes the API. The current version is 7.5. It gets installed at "C:\XL Driver Library". Vision SystemsThe support is available in version 1.7.0+. Please select "VScom" as hardware interface. Supported devicesAll devices on http://visionsystems.de/1_1_5.html should be supported: VScom USB-CAN ISO VScom USB-CAN P VScom USB-CAN VScom NET-CAN 120 WLAN VScom NET-CAN 110 VScom PCI-2CAN VScom SER-CAN Driver informationA driver download is available on the download page at http://visionsystems.de/downloadcenter.php Development kitThe VSCAN API is available on the download page at http://visionsystems.de/downloadcenter.php |
CopyRight 2018-2019 办公设备维修网 版权所有 豫ICP备15022753号-3 |