[问题]hypermesh导入ansys的cdb文件 |
您所在的位置:网站首页 › ansys如何导出cdb文件 › [问题]hypermesh导入ansys的cdb文件 |
我的操作是这样的: ANSYS导出cdb文件 hypermesh导入cdb文件 几何体iges文件的导入、导出没毛病打开C:\user*\document\下 的,报错文件(.hmx)如下: ** File: D:/program_test/bishe_bianpo/HyperMesh/cdb data from ansys/meshed5-9.cdb, Line: 5 -- The Keyword listed below is currently unsupported *IF,_CDRDOFF,EQ,1,THEN !if solid model was read in ** File: D:/program_test/bishe_bianpo/HyperMesh/cdb data from ansys/meshed5-9.cdb, Line: 6 -- The Keyword listed below is currently unsupported _CDRDOFF= !reset flag, numoffs already performed ** File: D:/program_test/bishe_bianpo/HyperMesh/cdb data from ansys/meshed5-9.cdb, Line: 7 -- The Keyword listed below is currently unsupported *ELSE !offset database for the following FE model ** File: D:/program_test/bishe_bianpo/HyperMesh/cdb data from ansys/meshed5-9.cdb, Line: 11 -- The Keyword listed below is currently unsupported *ENDIF ** File: D:/program_test/bishe_bianpo/HyperMesh/cdb data from ansys/meshed5-9.cdb, Line: 671720 -- No ET card defined for the Element. 1 1 1 1 0 0 504 0 10 0 186466 256334 258395 258711 257611 272957 279414 275236 275237 279416 275235 ** File: D:/program_test/bishe_bianpo/HyperMesh/cdb data from ansys/meshed5-9.cdb, Line: 671725 -- The Keyword listed below is currently unsupported EXTOPT,ATTR, 0, 0, 0 ** File: D:/program_test/bishe_bianpo/HyperMesh/cdb data from ansys/meshed5-9.cdb, Line: 671726 -- The Keyword listed below is currently unsupported EXTOPT,ESIZE, 0, 0.0000 ** File: D:/program_test/bishe_bianpo/HyperMesh/cdb data from ansys/meshed5-9.cdb, Line: 671727 -- The Keyword listed below is currently unsupported EXTOPT,ACLEAR, 0 ** File: D:/program_test/bishe_bianpo/HyperMesh/cdb data from ansys/meshed5-9.cdb, Line: 671743 -- The Keyword listed below is currently unsupported DMPSTR, 0.00000000 ** File: D:/program_test/bishe_bianpo/HyperMesh/cdb data from ansys/meshed5-9.cdb, Line: 671757 -- The Keyword listed below is currently unsupported /GO 其中No ET card defined for the Element.这一条错误,出现了几十万条。其余均只有一条错误。 有朋友成功导入cdb文件的吗? 我还试过,将一个很简单的梁的模型,从hypermesh中导入ansys,再导出来,报错信息基本也是这几条。是版本问题吗? 我的软件版本: hypermesh12.0(2017), ansys15.0 |
今日新闻 |
推荐新闻 |
CopyRight 2018-2019 办公设备维修网 版权所有 豫ICP备15022753号-3 |